ends February 6th!

Tongue Tite Wood Flooring Screws [ACC-IN-TT-002]

(17 customer reviews) Read reviews

Enlarge Image

NOW ONLY £0.74 sq.m.

Product Code: ACC-IN-TT-002
Pack Size: 10.00 sq.m.

How Much Could You Save By Ordering Today

For instant quote
Enter sq.m. required

Product Information
Product Specification
Installation Guide
Maintenance Guide
Product Reviews
Accessories

Our unique Tongue Tite® Wood Flooring Screws are designed to make installing your new flooring as easy as possible and are particularly DIY friendly. Each pack includes 200 screws to cover upto 10m2 of flooring and a matching drill bit to fit the head of the screw.

All that is needed to perform this cost effective installation method is an electric screwdriver or drill powertool !

Tongue Tite® Wood Flooring Screws can be used to fix solid wood and engineered wood floors as well as bamboo flooring to a wooden/chipboard subfloor. Due to their unique design they will not come loose when walked on which prevents any annoying squeeking sometimes found with nails. Strong and tough these screws will not break during seasonal movements of wood flooring.

Each screw is 45mm in length and has a narrow countersunk head so it does not prevent the next board being placed, therefore hiding the screws from sight. Screws should be placed at at 30-45 degrees angle to the exposed side of the tongue, where the tongue and rise meet. As you can see from the image this means no screws can be seen once installation is finished and it does not harm the surface of your new flooring.

Due to the angle that it inserts the board the screw actually drives around 27mm. Most of which is taken by the thickness of your flooring leaving the rest to safely drive into the substrate to get a secure a strong grab.

Accessories Type	Installation Tools
Accessories For	Solid Wood Engineered Wood Bamboo

How To Use Our Tongue Tite® Wood Flooring Screws ?

We recommend that you insert the Tongue Tite® Wood Flooring Screw at an angle of 30-45 degress to the exposed face on the tongue side, and being where the tonge meets the rise. This will drive the screw through the board and out into the substrate.

Make sure the head of the screw sit beneath the tongue so it does not interefe with the next board to be placed.

For a secure fix we advise that you insert your screw every 300mm. (Please Note : if you are placing a screw within 50mm of the end of the board we recommend pre-drilling the hole to avoid splitting.)

Customer reviews

Julie, Neath

Rating:

Date added: Sunday 04, December, 2011

Good quality strong screws, have a few spares left and these were easy to use.

Claire, Sheffield

Rating:

Date added: Sunday 20, November, 2011

Could do with an extra drill bit as it was too soft and wore out quickly

Franne, Halifax

Rating:

Date added: Sunday 13, November, 2011

great to work with, easy to use.

Mike, Stoke-on-trent

Rating:

Date added: Thursday 10, November, 2011

Used before with good results

Mark, Lewes

Rating:

Date added: Sunday 30, October, 2011

excellent but make sure you have a new torx bit per box.

Lee, Bexleyheath

Rating:

Date added: Wednesday 26, October, 2011

easier than nailing

Paul, London

Rating:

Date added: Thursday 29, September, 2011

he floorinf screws simplify the fixing in tight areas although they are slower than the nail gun method.

Paramsothy, London

Rating:

Date added: Thursday 29, September, 2011

very good

Tracey, Caterham

Rating:

Date added: Tuesday 13, September, 2011

do what they need to do

Neil, Melton Mowbray

Rating:

Date added: Sunday 21, August, 2011

I used these screws on engineered flooring. They were quicker than using a floor nailer. I found it possible to place the screws within 10mm of the end of a piece of flooring, without a pilot hole and it did not cause the wood to split.

Ted, Bath

Rating:

Date added: Friday 12, August, 2011

very helpful with bit provided for a drill

Stefania, London

Rating:

Date added: Sunday 31, July, 2011

excellent suggestion for an easy fit and invisible look

David, Ipswich

Rating:

Date added: Monday 18, July, 2011

Easy to fit

Robert, Monmouth

Rating:

Date added: Thursday 07, July, 2011

There screws are fantastic. No need to pre drill even in oak. Saved allot of time.

Ravinder, Milton Keynes

Rating:

Date added: Thursday 16, June, 2011

Good screws which secure the flooring down very well. However, pre-drilling is required to prevent splits in the wood.

Eric, Chippenham

Rating:

Date added: Wednesday 15, June, 2011

The screws are ideal for the flooring product purchased even down to providing the driver bit for screws.

Steve, Shaftesbury

Rating:

Date added: Tuesday 31, May, 2011

Excellent product. Worked perfectly for our project to lay 60m2 of 22mm solid oak flooring. The only slight issue I had was that the supplied torx bit wore out quite quickly but that was easily overcome by getting some diamond Wera bits which lasted much longer.