Florence Engineered Euro Family Oak Flooring 180mm Cherry Oiled is 180mm wide, has a total thickness of 14mm and comes in standard lengths of 2200mm. 

This is a 3 ply engineered floor so it is made from 3 different layers, one being the hardwood wear layer with the other 2 being constructed from spruce.
The floor has a 2.5mm hardwood layer which if need can be sanded and re-finished up to 3 times, but under a normal maintenance program and in a domestic environment the floor should not need to be sanded for around 20 years.
Each of the planks has bevelled edges (V Grooves) on all four sides resulting in very distinctive groove between the planks, adding more depth and dimension along with giving an individual definition to each plank.
The floor is prefinished with natural oil which adds a deep warm natural feel to the floor. This seemingly transparent surface enhances the natural grain and structure of the wood, allowing its natural beauty to show whilst still offering a deep protection.
The family grade of this hardwood shows the true excellent appearance of the wood, the pattern of the rings beautifully depicts the annual growth of the tree and while small knots, limited character marks are allowed there is little or no sapwood, mineral streaks or splits.

Room Suitability
Environmental Benefits
Species	Oak
Construction	3 Ply
Core	Pine
Balance	Spruce
Wear layer	2.5mm
Lengths	2200mm
Edge Detail	4v Bevell
Profiling	Click System
Grading	Family
Stain	Cherry
Tolerances	length: one board per pack can be 20mm shorter; two boards per pack can be 10mm shorter width:+/-0,2mm cupping =/< 0,2% bowing 1% length level difference =/< 0,2mm
Timber Source	Europe
Product Origin	Europe
Moisture Content	7% +/- 2%
Product Density	min. 580
Brinell Hardness Test	3,7
Underfloor Heating	Yes
Slip Resistance	USRV 0,25
Installation Methods	Click System
Residential Warranty	30 years
Commercial Warranty	On Request
Species	Oak
Shade	Medium Dark
Colour	Brown Gold Red
Finish	Oiled
Grade	Family
Thickness	14mm
Width	155mm - 190mm
Style	Plank V Grooves
Installation	Click System

Florence Engineered Euro Family Oak Flooring 180mm Cherry Oiled Installation Guide

Engineered floors are very dimensionally stable allowing them to be installed over most types of sub floors. They are suitable for all areas of the house except bathrooms and wet areas. They are also suitable for use over under floor heating. Due to their stability they only need acclimatising for 48 hours, to correctly acclimatise your engineered floor it should be left in the room it is going to be fitted in at normal room temperature.

Florence Engineered Euro Family Oak Flooring 180mm Cherry Oiled has a click installation system and can be installed as a floating floor which is the most common and DIY friendly installation method because it is the easiest and the fastest to do, can be installed over any type of subfloor and it does not require any special skills or prior experience in installing floors as the floors just clicks together with no need for any glue.

All floating flooring installations must use an approved underlay. Over a concrete subfloor you will need to use a underlay which has a built in vapour barrier like Cushion Plus White Underlay, while over a wooden subfloor you can use the Cushion Standard White Underlay. For installations over under floor heating we recommend using Cushion Heat Flow underlay. Superior underlays like Cushion Ultra Silver Underlay and Cushion Premium Black Underlay can be used to give better support to your new flooring which prolongs the life and also aids during installation by removing some minor imperfections from the sub-floor. Also for improved noise reduction we recommend the Cushion Acoustic Pro Underlay, bringing peace and quiet to the room.

Each board has a click profile on all four sides to join the boards together simply insert the tongue into the groove at a high angle and then push the board down; the boards will then click together.

You will need to leave a 10mm expansion gap around the perimeter of the room. To maintain this gap during installation spacers are provided in the installation kits (purchased separately).

After you have installed the floor you can cover this expansion gap with scotia / beading or you can replace you old skirting boards with new ones, this gives a much more professional finish. The 10mm expansion gap also needs to be left in doorways where the floor follows through from one room to another; we have a full range of door profiles available to match your floor.

The above is a brief guideline on the installation of engineered flooring; always refer to the manufactures installation guidelines contained within packs of the flooring or visit outFlooring Manufacture Installation Guides

If you require any further advice on installation the please call our technical department on 0845 263 6586, e-mail us on info@ukflooringdirect.co.uk or click the Live Help Button at the top of the page.

 

Maintenance Guide For UV Oiled Floors

In order to ensure lasting satisfaction from your new UV oil finished floor, it is important to correctly care for the floor starting immediately after installation. With the right care, the oiled floor will become increasingly easy to clean and more hard wearing over time. This is because the recommended soap used to clean the floor actually coats it with an invisible film, providing additional protection and thus making the floor more resistant to dirt. As well, the floor can be re-oiled as part of a regular maintenance program thus ensuring a lifetime of use and enjoyment.

After-Installation Care

All UV Oiled floors are recommended to be finished with WOCA Maintenance Paste right after installation and before the floor is used. As a result of this the surface will then be more hardwearing and be easier to clean and maintain in the future.

Normal Basic Cleaning

Normal cleaning to remove surface debris is accomplished using a broom or vacuum cleaner. To remove normal stains and non-loose dirt, the floor should be cleaned with water and a hard-wrung, wet cloth. In order to achieve the best cleaning possible use WOCA Natural Soap Cleaner. This soap is added to the water in a 40:1 solution. WOCA Natural Soap has two functions: it cleans the floor and at the same time forms an invisible, protective film on the surface of the floor making it even more resistant to damage from dirt. It is very important to use two buckets when cleaning the floor- one with the WOCA Natural Soap mixed solution and one with clean water for rinsing the dirty cloth or mop. Immerse the cloth or soft mop in the Soap solution, and then wring out the excess fluid before wiping the floor. Rinse the cloth or mop in the clear water, wring out the excess water, then immerse in the Soap solution again. Repeat this pattern until the floor is clean. Do not pour the Soap solution directly on the floor but instead, always use a cloth or mop to apply the solution.

Cleaning Extremely Dirty Floors

If the floor has been neglected and/or becomes very dirty, it should be cleaned using WOCA Intensive Wood Cleaner. This is added to water in a 40:1 ratio, following the guidelines above. Immediately after cleaning with the Intensive Cleaner, the floor should then be cleaned with WOCA Natural Soap (as above) in order to restore the protective soap film then finished with WOCA maintenance Paste.

Spot Remover

Difficult spots can be removed with WOCA Spot Remover. The Spot Remover is sprayed on the spot and left in place until the stain is dissolved, repeat treatment if necessary. The area is then cleaned and re-oiled with WOCA Maintenance Paste.

We recommend that you purchase a WOCA UV Oiled Maintance Kit with your floor.

Each kit contains

1.0 liter Natural Soap Concentrate (Will cover 350m2)
1.0 liter Intensive Wood Cleaner (Will cover 200m2)
400ml Maintenance Paste (Will cover 100m2)
1 Polishing Pad and 1 Cloth.