Galleria Engineered Structural Fumed Oak 189mm Oiled is a beautiful nature grade oak floor with a range of attractive natural features, giving it a traditional character. Among these are lines, knots, colour variations and a few hints of sapwood and character marks.
The grain has been emphasised by the addition of a UV oil, which gives extra protection and a warm feel. It has V-grooves between planks as a result of each piece having bevelled edges on all four sides, the effect being greater definition and depth for the whole floor.
As well as looking attractive, the product is also extremely stable, with 11 layers of birch plywood material, which are topped with 4 mm of oak hardwood. This surface section is designed to be sanded up to six times, although it can last as long as 20 years without this being required if it is looked after well.
Galleria Engineered Structural Fumed Oak 189mm Oiled is 189mm wide, has a total thickness of 18mm and comes in standard lengths of 1860mm with 2 starter boards at random length in each pack.
| Room Suitability |
|
| Environmental Benefits |
|
| Species | Oak |
| Construction | Multi ply |
| Core | Birch Plywood |
| Wear layer | 4mm |
| Lengths | 1860mm with 2 @ 930mm |
| Edge Detail | 4v Bevell |
| Profiling | Tongue & Groove |
| Grading | Nature |
| Stain | Fumed |
| Timber Source | Europe |
| Product Origin | Asia |
| Moisture Content | 7-10% |
| Load Bearing Floor | Yes |
| Underfloor Heating | Yes |
| Installation Methods | Tongue & Groove,Nail Down,Glue Down |
| Residential Warranty | 20 Years |
| Commercial Warranty | On Request |
| Species | Oak |
| Shade | Dark |
| Colour | Black Brown |
| Finish | Oiled Brushed & Oiled |
| Grade | Nature |
| Thickness | 18mm |
| Width | 155mm - 190mm |
| Style | Plank V Grooves |
| Installation | Nail/Screw Down T & G Installation Glue Down Fast Fit Peel & Stick |
Florence Engineered Structural Fumed Oak 189mm Oiled Installation Guide
Engineered floors are very dimensionally stable allowing them to be installed over most types of sub floors. They are suitable for all areas of the house except bathrooms and wet areas. They are also suitable for use over under floor heating.
All floating flooring installations must use an approved underlay. Over a concrete subfloor you will need to use a underlay which has a built in vapour barrier like Cushion Plus White Underlay, while over a wooden subfloor you can use the Cushion Standard White Underlay. For installations over under floor heating we recommend using Cushion Heat Flow underlay. Superior underlays like Cushion Ultra Silver Underlay and Cushion Premium Black Underlay can be used to give better support to your new flooring which prolongs the life and also aids during installation by removing some minor imperfections from the sub-floor. Also for improved noise reduction we recommend the Cushion Acoustic Pro Underlay, bringing peace and quiet to the room.
Each board has a Tongue and grooved profile on all four sides, to join the boards together simply insert the tongue into the groove on a flat surface after running a bead of glue along the inside of the groove on the board you are trying to fixate.
You will need to leave a 10mm expansion gap around the perimeter of the room. To maintain this gap during installation spacers are provided in the installation kits (purchased separately).
After you have installed the floor you can cover this expansion gap with scotia / beading or you can replace you old skirting boards with new ones, this gives a much more professional finish. The 10mm expansion gap also needs to be left in doorways where the floor follows through from one room to another; we have a full range of door profiles available to match your floor.
Engineered Tongue and Grooved flooring can also be fully glued down, secret nail/screwed down or glued down with liquid battens.
The above is a brief guideline on the installation of engineered flooring; always refer to the manufactures installation guidelines contained within packs of the flooring or visit our Flooring Manufacture Installation Guides
If you require any further advice on installation the please call our technical department on 0845 263 6586, e-mail us on info@ukflooringdirect.co.uk or click the Live Help Button at the top of the page.
In order to ensure lasting satisfaction from your new UV oil finished floor, it is important to correctly care for the floor starting immediately after installation. With the right care, the oiled floor will become increasingly easy to clean and more hard wearing over time. This is because the recommended soap used to clean the floor actually coats it with an invisible film, providing additional protection and thus making the floor more resistant to dirt. As well, the floor can be re-oiled as part of a regular maintenance program thus ensuring a lifetime of use and enjoyment.
All UV Oiled floors are recommended to be finished with WOCA Maintenance Paste right after installation and before the floor is used. As a result of this the surface will then be more hardwearing and be easier to clean and maintain in the future.
Normal cleaning to remove surface debris is accomplished using a broom or vacuum cleaner. To remove normal stains and non-loose dirt, the floor should be cleaned with water and a hard-wrung, wet cloth. In order to achieve the best cleaning possible use WOCA Natural Soap Cleaner. This soap is added to the water in a 40:1 solution. WOCA Natural Soap has two functions: it cleans the floor and at the same time forms an invisible, protective film on the surface of the floor making it even more resistant to damage from dirt. It is very important to use two buckets when cleaning the floor- one with the WOCA Natural Soap mixed solution and one with clean water for rinsing the dirty cloth or mop. Immerse the cloth or soft mop in the Soap solution, and then wring out the excess fluid before wiping the floor. Rinse the cloth or mop in the clear water, wring out the excess water, then immerse in the Soap solution again. Repeat this pattern until the floor is clean. Do not pour the Soap solution directly on the floor but instead, always use a cloth or mop to apply the solution.
If the floor has been neglected and/or becomes very dirty, it should be cleaned using WOCA Intensive Wood Cleaner. This is added to water in a 40:1 ratio, following the guidelines above. Immediately after cleaning with the Intensive Cleaner, the floor should then be cleaned with WOCA Natural Soap (as above) in order to restore the protective soap film then finished with WOCA maintenance Paste.
Difficult spots can be removed with WOCA Spot Remover. The Spot Remover is sprayed on the spot and left in place until the stain is dissolved, repeat treatment if necessary. The area is then cleaned and re-oiled with WOCA Maintenance Paste.
We recommend that you purchase a WOCA UV Oiled Maintance Kit with your floor.
Each kit contains
1.0 liter Natural Soap Concentrate (Will cover 350m2)
1.0 liter Intensive Wood Cleaner (Will cover 200m2)
400ml Maintenance Paste (Will cover 100m2)
1 Polishing Pad and 1 Cloth.