If you know how to take care of your hardwood floor, you will see it can last for a long time. One of the most effective methods to care for a hardwood floor is to steam clean it. Here are some instructions to help with doing this job:
Step 1: Determine What Type of Floor You Have: Before you even think about steam cleaning your floor, it’s important to look at the type of hardwood floor you have. Then, find out if it requires any kind of special care. Next, look for some information regarding what you’re cleaning specifically. Some stains are harder to clean than others, and doing the wrong thing can actually damage the floor.
Step 2: Sweep The Floor: Before actually starting to steam clean, clean up any debris, no matter how small. Take a broom and sweep up as thoroughly as you can.
Step 3: Pick a Steam Cleaner: Be very careful when picking a steam cleaner to use. Some steam cleaners are very expensive, but are not right for a specific floor’s needs. Always check before making a large purchase. If possible, read different reviews carefully to make sure you’re buying what you’re looking for!
Step 4: Fill the Steam Cleaner with Water: All steam cleaners come with a typical instruction manual. Most people disregard the manual because they think they can figure it out by themselves but, it’s better not to do this. The manual is extremely important because it will tell you exactly how much water is needed to fill the steam cleaner.
Step 5: Plug in the Cleaner: Steam cleaners usually take between 5 and 10 minutes to get hot and produce steam so be patient.
Step 6: Begin Cleaning: Start with 2-feet sections and begin cleaning them. There is no specific direction to work in, just keep the sections small. Continue until the whole floor is clean.
Step 7: Dry the Floor: Some modern steam cleaners actually have a “dry” setting on them. If you have one of those, simply switch to this mode, and dry your hardwood floor. This is a great way to avoid any possibility of water damage.
Additional Information
