With so many carpet cleaners in the market, it can be tough to find out which is the most suitable for your purpose. There are multiple brands and types of carpet cleaners designed to clean different types of carpets in different locations and situations.
Step 1: Determine the Type of Carpet You Have: While its true most carpet cleaners are designed to work with all kinds of carpet, there are certain types or brands of carpet cleaner that are more effective on certain types of carpet. For insurance, it’s best to check out the type of carpet you have before deciding on the brand or type of carpet cleaner.
Step 2: Decide What Type of Carpet Cleaner You Need: Next, you have to find out what type of cleaner you actually need. There are two main types of carpet cleaners: wet systems and dry systems. Wet systems wet the carpet as it cleans, while dry ones do not.
Step 3: Check ConsumerSearch: One of the web’s top sites for customer reviews, this site pulls in lots of different information and reviews. They have the best Carpet Cleaner listed as the Hoover SteamVac with Clean Surge F5914-900, costs around $160.00.
Step 4: Epinions: Epinions, another consumer website, lists the Euro-Flex SC60 Canister Steam Cleaner as the best-reviewed cleaner on their website. This one typically costs around $100, and the site links to Overstock.com, where its cheapest.
Step 4: Check Amazon: After you have an idea of what kind of carpet cleaner you want, its a good idea to check general sale sites. While anyone can post a review, you’ll get a very good idea of how the carpet cleaner was received by the public.
Step 5: Check Nextag: The website Nextag lists the Bissell 2080 QuickSteamer Carpet Cleaner as their best-reviewed cleaner. It has many features and goes for around $100. It can be found in many different common stores as well.
Step 6: Check VacuumWizard: VacuumWizard lists the McCulloch MC-1275 as their top-rated carpet cleaner. Its compact and lightweight, but still very powerful. This one typically goes for around $110.
Step 7: Check ProntoHome: The Hoover F7412-900 Carpet Cleaner is also extremely popular. It has a lot of positive reviews on many different websites, and it goes for around $210.
Additional Information:
· How To Choose The Best Carpet Cleaner
Title: How to Transition Carpet to a Tile Floor
Changing carpet to tile flooring can transform the appearance of a home. Tile flooring makes a home more elegant, and is easier to clean and maintain. Transitioning carpet to tile flooring requires a lot of work, but can be done if the homeowner has enough patience and knowledge.
The first thing to do is to remove the old carpet flooring. Go to the corner of the room and pull the carpet from the tack strip. Use a utility knife to cut out a strip of carpet 3-foot wide. Then, roll the strip and use masking tape to secure it. Repeat the process until the entire carpet is removed. The carpet padding should also be removed the same way. Then, take out the tack strip with a hammer and a pry bar.
Before the tile flooring is laid in the room, make sure the sub-floor is clean and level. Plywood can be used as the base flooring for tiles, especially if the sub-floor is not in good condition. Start laying the plywood boards at the center of the room, and then move towards the perimeter. Lay the boards in a staggered pattern, so that no four corners will be together. When nailing a board to the sub-floor, make sure the nails are positioned along the edges of the board, four inches apart.
After the plywood boards are installed, start to plan how the tiles will be laid in the room. The tiles can be laid in an alternating pattern or they can run in one direction. Some flooring tile sets may have different colored tiles, and they can be arranged in many different ways. Planning the arrangement of the tiles will ensure that mistakes will not occur when the tiles are being laid.
Some tiles are self-adhesive, while others need adhesive to be applied before they are laid. To apply adhesive to the base flooring, start to spread the adhesive evenly over a quarter of the room. After the adhesive is applied, wait about 15 minutes, and then, put a thumb to the adhesive to test whether it is ready. If the adhesive feels tacky, but it does not stick to your finger, start to lay the tiles.
The first tile should be laid at the center of the room. Make sure that all the tiles are tightly butted together. The last tile in every row should be properly cut to fit the gap between the second-last tile and the wall. After the entire floor is covered with tiles, the installation is complete. The new tile flooring can only be washed one week after the installation.
